Coaxial antenna cable or co-axial cable is mainly used in television receivers due to its construction design. The waves received by the antenna are transmitted to the TV receivers through this cable.

The coaxial of two conductors eliminates noise and prevents unwanted waves from entering the main signal and high-frequency waves from exiting.

HEDSUN antenna cables, both the conductor and the shield are all copper and the diameter of the conductor is 1 mm. The impedance of the cable is 75 ohms. Its shield overlap percentage is above 95%. One of the characteristics of the Hudson antenna cable is that it is resistant to UV rays. Antenna cables are supplied in carton and reel packaging.

75 coaxial cable

– High frequency coaxial cable according to JIS 3501 standard

– Thermal range: -35°C to +80°C

– Insulation resistance: at least 10000MΩ.Km

– Voltage test: 2000V a.c. 50Hz

HEDSUN’s all-copper coaxial cables are used in high-frequency transmissions, especially in transmitters, receivers, computers, and radio and television transmissions. The most common use of this cable is in home televisions.

The variable mechanical, thermal, and electronic properties of all-copper coaxial cables indicate that these cables can be used up to GHz levels.

– Cu / PE / Cu / PVC

– Class 1 or 2 copper conductor according to IEC 60228

– PE insulation

– Woven copper shield

– PVC coating, white or gray color

Capacitor at 1KHz

nf/km

Impedance

ohm

Attenuation power at 10MHz

db/km

Approximate weight

kg/km

Average outer diameter

mm

Coating thickness

mm

Insulation thickness

mm

Number of strings x diameter of strings

mm

Coaxial cable type
69±4 75 96 13 2.9 0.4 0.67 1*0.26 1.5C-2V
69±4 75 52 22 4.0 0.5 1.0 1*0.4 2.5C-2V
67±3 75 42 42 5.4 0.8 1.3 1*0.5 3C-2V
67±3 75 22 47 6.4 0.6 1.75 1*1.0 4.5C-2V
67±3 75 27 74 7.4 0.9 2.05 1*0.8 5C-2V
67±3 75 27 120 8.3 1.0 2.05 1*0.8 5C-2W
67±3 75 22 140 10.4 1.1 3.05 7*0.4 7C-2V
67±3 75 18 220 13.0 1.4 3.95 7*0.5 10C-2V
Antenna coaxial cable