HEDSUN network cable is one of the latest specialized products of Electrosim Hedayat company. This cable is one of the highest quality passive network equipment in the Iranian market, which is produced with European equipment and standards.

HEDSUN’s network cable is cat6 and is produced in two types, UTP and SFTP. This model of network cable is produced in 305-meter reel packages inside the box for UTP network cable in warm yellow color. HEDSUN’s SFTP network cable is available in 500-meter reels in bright yellow color.

– Cat6 U/UTP network cable

– Polyethylene (PE) conductor coating material

– The material of the final cover is PVC or LSZH or PE

– AWG 23 copper wire conductor

– According to the standards:

  • Standard ANSI/TIA/EIA-568-B.2-10 (250MHZ)
  • ISO/IEC 61156-5
  • EN 50173
  • EN 50288-4-1
  • ISO/IEC 11801

– Thermal range:

  • 0°C to +50°C in bending mode
  • In fixed installation C°-20 to C°+60

– Bending radius:

  • During installation: 8x in outer diameter
  • After installation: 6x in outer diameter

– Tensile strength: 110 N

_ Crush strength: 1000N / 100mm

_ With fluke test (channel and permanent)

– Cat6 U/UTP network cable

– Polyethylene (PE) conductor coating material

– The material of the final cover is PVC or LSZH or PE

– AWG 23 copper wire conductor

– According to the standards:

  • Standard ANSI/TIA/EIA-568-B.2-10 (250MHZ)
  • ISO/IEC 61156-5
  • EN 50173
  • EN 50288-4-1
  • ISO/IEC 11801

– Thermal range:

  • 0°C to +50°C in bending mode
  • In fixed installation C°-20 to C°+60

– Bending radius:

  • During installation: 8x in outer diameter
  • After installation: 6x in outer diameter

– Tensile strength: 110 N

_ Crush strength: 1000N / 100mm

_ With fluke test (channel and permanent)

HEDSUN network cables are used for various related purposes, including the following:

_ Computer Networks

_ CCTV cameras under the network

_ Data centers

_ servers

_ Voip

_ PoE/PoE+/4PPoE network active equipment

_ All class D to E network equipment over 1GbE and up to the IEEE 802.3 ab standard.

– copper conductor

_ Cross-sectional area of the conductor of each strand (AWG): 23

– No shield or foil

– PE insulation

_ PVC/PE/LSZH coating

– copper conductor

_ Cross-sectional area of the conductor of each strand (AWG): 23

– With aluminum foil and shield

– PE insulation

_ PVC/PE/LSZH coating